• 303 1.4305 Stainless Steel round bar
  • 303 1.4305 Stainless Steel forging
  • 303 1.4305 Stainless Steel sheet
  • 303 1.4305 Stainless Steel flat bar
  • 303 1.4305 Stainless Steel pipe
Home > Stainless Steel > 303 1.4305 Stainless Steel

303 1.4305 Stainless Steel

We can produce 303 1.4305 Stainless Steel stainless steel round rods, 303 1.4305 Stainless Steel forging,sheet,coil,and profiledstrip,Deformed steel,flat steel,mould,steel wire,have all specifications. With DuoNian production experience, strict control 303 1.4305 Stainless Steel chemical composition and 303 1.4305 Stainless Steel mechanical properties.From casting, forging, steel to hot and cold rolling process, heat treatment, etc, we have the control of professional engineers. We have advanced precision machining equipment, according to the requirements of users machining. in order to achieve the most satisfied with the user requirements.

Production specification

Round bar steel: 1mm to 3500mm
Square-shape steel: 1mm to 4000mm
Plate steel:0.1mm to 4000mm
Width: 10mm to 2500mm
Lenth: We can supply any lenth based on the customer's requirement.
Forging: Shafts with flanks/pipes/tubes/slugs/donuts/cubes/other shapes
Tubings: OD: φ6-1800mm, with wall thickness ranging from 1-35 mm.
Finished goods condition: hot forging/hot rolling + annealing/normalizing + tempering/quenching + tempering/any conditions based on the customer's requirement
Surface conditions: scaled (hot working finish)/ground/rough machining/fine machining/based on the customer's requirement
Furnaces for metallurgical processing: electrode arc + LF/VD/VOD/ESR/Vacuum consumable electrode.
Ultrasonic inspection: 100% ultrasonic inspection for any inperfections or based on the customer's requirementExcellent service for all kinds of industries,with advantages of technologies, equipment and price.
We serve you with our honesty, integrity, and professionality.

303  1.4305 Stainless Steel

 

303 is a sulphur bearing austenitic free machining stainless. 303 stainless offers excellent corrosion resistance with improved machineability to the more popular 304 stainless grade. As with other austenitic stainless steel grades 303 stainless offer excellent toughness though the higher sulphur content reduces the toughness slightly in 303 stainless. 303 stainless will give good oxidation resistance in occasional service up to 750ºC and in continuous service up to 870ºC (but this is not recommended for 303 grade stainless) The higher sulphure content of 303 stainless steel gives the grade poor weldability and reduced formability compared with other austenitic stainless specifications.

 

 

Typical Analysis

 303

 

 

 

 

C.

Mn.

P.

S.

Si.

Cr.

Ni.

0.15%

2.00%

0.05%

0.15%

1.00%

17.00-

8.00-

max.

max.

max.

min.

max.

19.00%

10.00%

 

 

Physical Properties 303        
  Temperature    
 

20ºC

200ºC

400ºC

800ºC

Modulus of elasticity

20000

18500

17000

13500

kg/mm        
Specific heat

0.105

0.125

0.135

0.15

kcal/ºC        
Specific electrical resistance

0.7

0.8

1.0

1.15

(resistivity)        
         
  Mean value for:    
 

20-100ºC

20-200ºC

20-400ºC

20-800ºC

Coefficient of Thermal Expansion

17

17.5

18

19.5

x10-6 per ºC        
         
Density g/cm3 at 20ºC

7.9

 

   
         
Scaling temperature ºC

 875ºC

 

   

Mechanical properties

303 1.4305 Stainless Steel Mechanical properties,Our production completely according to the 303 1.4305 Stainless Steel standards to meet the 303 1.4305 Stainless Steel mechanical performance, can also according to the customer request, to meet the requirements of customers of 303 1.4305 Stainless Steel mechanical properties.

Heat treatment

303 1.4305 Stainless Steel Heat treatment,Our production completely according to the 303 1.4305 Stainless Steel standards to meet the 303 1.4305 Stainless Steel Heat treatment, can also according to the customer request, to meet the requirements of customers of 303 1.4305 Stainless Steel Heat treatment.

Machining

303 1.4305 Stainless Steel Machining,Our production completely according to the 303 1.4305 Stainless Steel standards to meet the 303 1.4305 Stainless Steel Machining, can also according to the customer request, to meet the requirements of customers of 303 1.4305 Stainless Steel Machining.

Welding performance

303 1.4305 Stainless Steel Welding performance,Our production completely according to the 303 1.4305 Stainless Steel standards to meet the 303 1.4305 Stainless Steel Welding performance, can also according to the customer request, to meet the requirements of customers of 303 1.4305 Stainless Steel Welding performance.

Related hot word search:303 1.4305 Stainless Steel round bar 303 1.4305 Stainless Steel,forging 303 1.4305 Stainless Steel,303 1.4305 Stainless Steel sheet,coil 303 1.4305 Stainless Steel,303 1.4305 Stainless Steel flat bar,pipe 303 1.4305 Stainless Steel,303 1.4305 Stainless Steel Lrregular

Prev:FV520B Stainless Steel
Next:310 Stainless Steel